I feel bad for people who end up with these knock off supper horrible atvs. You know its going to be a bad ownership experience in a very short time. To bad. Have fun while that thing still runs. And Im not being mean man. Seen all of these Knock offs just dye out in the woods.
Good video and cool idea. If you cut the bottom 1/2" of a plastic bottle off you could place it upside down in the PVC to keep the can or bottle off the u-bolt nut. If you cut the bottle at 3/4", you could hold the cut edge next to a flame (candle, lighter etc.) and it will roll the edge nice and clean and give it more strength. It takes only one practice plastic bottle to become adept at it.
Is this what people are doing these days? Back in my day we were buying quads like banshees and 250rs. Nerf nets, pipes…. and hold the fuk on as your pulling a wheelie at 60mph.. Today’s quads are like rolling recliner chairs.
You might as well hook that up to a cb so you and your buddys can talk while your ride trails if you need to. I have seen that done before watching trail ride videos
google "Lil Sucker".!.
it is a little ring that you put on the bottom of a can, bottle, or cup and it suctions cups to a smooth surface. they work really well if you make sure it is pressed down tight. i stick just put my drink on my fender and it stays. i also use them for rafting and kayaking
That is one awesome idea and here is another good idea for people out there you can also make one of them ATV speaker boxes out of PVC instead of going off and spending 260 Plus depending on which Bluetooth speakers you buy and just use a waterproof motorcycle radio mounted in the PVC
As an upgrade on cup holder spray expanding foam in bottom while peices are together, then take top off and cut foam so it’s just past the height of bolts then drill the holes through the foam to match drain holes. Just an idea to possibly improve.
Thats a cool cup holder dude. Great idea. I’m searching for a way to put a hidden cooler inside the fourwheeler somehow. So I don’t have to strap it on the back.
LOL I just got a 4wheeler couple months back (had one back in the day and ride a dual sport now) so was checking to see what other people have done. I’m almost done putting 2 fog light and a spot light mounted on a piece of wood I cut and painted for front rack.. And going to mount a gun rack on front next.
2LateIWon/Organized Chaoson April 1, 2022 at 6:58 pm
Great Idea but I never understood why people feel like they have to drink and ride. You should be staying hydrated with water anyways. Wait till your back at camp and get dog face drunk if you want. Don’t ride the trails drunk when me my kids and my wife are trying to have a fun time too. It’s just an accident waiting to happen.
Great Idea great vid this is just a pet peeve of mine (Ive known too many accidents that were 100% preventable if people just waited till they were at camp )
Nice, I have a 16 270. same bike. Im snorkeling and waterproofing it now. just incase a sneaky hole gets me by surprise at the mud trail park. so far pretty happy with this Kymco.
Great ideas! I really like the EL Wire String Rope (you called it plasma rope) I’m definitely going to use that, the cup holder is also a good idea but not sure it’s for me, I don’t like stuff rattling around but with room for a coozie that would be a win win, not rattle and colder beverage. I’m not even looking at the comments where people are going rant about beer and riding. speaking of rants….anyway thanks for the ideas and the video, Happy trails to all and to all good wheelin
For about $3.00 you could have bought a water bottle holder that are sold for bicycles and mounted it on your fender below your handle bars. That’s where I have mine mounted along with a military surplus cartridge pouch for small items. They have a nice fit and finish and look like a factory install.
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.Ok
Cool cup holder one thing you could do is cut a piece round rubber set it in bottom won’t rot and easy clean up .
I “polished my helmet” this weekend too! A couple of times! lol
I’m just got all the stuff to make a cup holder just like you did what a great idea
awesome idea
Great video thanks for sharing
I feel bad for people who end up with these knock off supper horrible atvs. You know its going to be a bad ownership experience in a very short time. To bad. Have fun while that thing still runs. And Im not being mean man. Seen all of these Knock offs just dye out in the woods.
Good video and cool idea. If you cut the bottom 1/2" of a plastic bottle off you could place it upside down in the PVC to keep the can or bottle off the u-bolt nut. If you cut the bottle at 3/4", you could hold the cut edge next to a flame (candle, lighter etc.) and it will roll the edge nice and clean and give it more strength. It takes only one practice plastic bottle to become adept at it.
Found mount in parking lot hmm wonder if was a truck stop
Cool mods but I don’t like the video because I saw the word "Kymco"
cool ideas man
I think I just caught down syndrome watching this video
Nice idea.
Is this what people are doing these days? Back in my day we were buying quads like banshees and 250rs. Nerf nets, pipes…. and hold the fuk on as your pulling a wheelie at 60mph.. Today’s quads are like rolling recliner chairs.
?are easyer
You might as well hook that up to a cb so you and your buddys can talk while your ride trails if you need to. I have seen that done before watching trail ride videos
Found your Video. Always looking for Gadget. Your’s realy cool. Merry Christmas soon, from Germany.
google "Lil Sucker".!.
it is a little ring that you put on the bottom of a can, bottle, or cup and it suctions cups to a smooth surface. they work really well if you make sure it is pressed down tight. i stick just put my drink on my fender and it stays. i also use them for rafting and kayaking
That is one awesome idea and here is another good idea for people out there you can also make one of them ATV speaker boxes out of PVC instead of going off and spending 260 Plus depending on which Bluetooth speakers you buy and just use a waterproof motorcycle radio mounted in the PVC
If you dont want webs on your face then wear a helmet dumbass
the web splitter is useless
I got a milk crate and the huge zip ties and i keep a come along,chain,strap,and that kind of stuff
As an upgrade on cup holder spray expanding foam in bottom while peices are together, then take top off and cut foam so it’s just past the height of bolts then drill the holes through the foam to match drain holes. Just an idea to possibly improve.
craptaculos
wheres your cup cake holder?
joke junk!!
Zip ties on ties for bungee is brilliant. Although I ride with gear so webs aren’t an issue.
GREAT VIDEO!! BUT I HATE HATE HATE HATE THE ADS BEFORE THE VIDEO ..
Thats a cool cup holder dude. Great idea. I’m searching for a way to put a hidden cooler inside the fourwheeler somehow. So I don’t have to strap it on the back.
nice i have same atv at 0:02
LOL I just got a 4wheeler couple months back (had one back in the day and ride a dual sport now) so was checking to see what other people have done. I’m almost done putting 2 fog light and a spot light mounted on a piece of wood I cut and painted for front rack.. And going to mount a gun rack on front next.
please…can you make a video to how to reinforce and maintane the side skirts or the nerf bar
Awesome I’m gonna try and sweet ride
Great Idea but I never understood why people feel like they have to drink and ride. You should be staying hydrated with water anyways. Wait till your back at camp and get dog face drunk if you want. Don’t ride the trails drunk when me my kids and my wife are trying to have a fun time too. It’s just an accident waiting to happen.
Great Idea great vid this is just a pet peeve of mine (Ive known too many accidents that were 100% preventable if people just waited till they were at camp )
Found the mount in a parking lot lol on a truck right lol
He was listening to animals
Nice, I have a 16 270. same bike. Im snorkeling and waterproofing it now. just incase a sneaky hole gets me by surprise at the mud trail park. so far pretty happy with this Kymco.
Great ideas! I really like the EL Wire String Rope (you called it plasma rope) I’m definitely going to use that, the cup holder is also a good idea but not sure it’s for me, I don’t like stuff rattling around but with room for a coozie that would be a win win, not rattle and colder beverage. I’m not even looking at the comments where people are going rant about beer and riding. speaking of rants….anyway thanks for the ideas and the video, Happy trails to all and to all good wheelin
Anyone else look around you when the siren played in the background?
Nice!Just picked up my first wheeler today a 300 EX so looking for cool ideas.Glad I came across new subscribee
Good ideas! Thanks for the video!
Great video. What state?
For about $3.00 you could have bought a water bottle holder that are sold for bicycles and mounted it on your fender below your handle bars. That’s where I have mine mounted along with a military surplus cartridge pouch for small items. They have a nice fit and finish and look like a factory install.
Great idea! I might suggest its own suspension and a foam insert. Brilliant
Its not neat
you should make at least 12 of those beverage holders…
i have been riding for years, owned 6 different ayvs. never have i even had a thought that i needed a web splitter lmao
nice and cool ideas
Yeah…. ok then……
That sucks
Nice,would this work on a Suzuki LT185