DIY Farmhouse Furniture (Console Table)
DIY Farmhouse Furniture (Console Table)
Farmhouse furniture is a key part of our channel. In this video I show you how to build a farmhouse console table. This video shows you how to build a coffee bar or kitchen cart, kitchen island, x console table, whatever you want to call this unique piece of furniture. Building something like this can give you great farmhouse decorating ideas. If you’re looking for coffee bar ideas, this would be a great piece of furniture that can be used in a variety of locations. It can be used for anything from a farmhouse TV stand to a coffee bar. This DIY coffee bar video shows you step by step how to build a farmhouse coffee bar. Using this farmhouse furniture paint scheme, this color combo will add that farmhouse style to your home. Comment below if you plan to build a side table like this. A DIY coffee station can be a great piece to add to your home. Building a farmhouse table like this can add a nice piece of farmhouse decor to your home. You could even use this as a farmhouse entryway table. Affiliate links below
Check the links below for products I use and recommend (affiliate links). Tools and supplies I use and recommend:
Kreg Rip Cut: https://go.magik.ly/ml/caoo/
Ridgid Router: https://go.magik.ly/ml/caop/
Kreg pocket hole jig: https://amzn.to/2D8LQsu
Paint sprayer: https://amzn.to/2O9hszl
Face clamp: https://amzn.to/2CJ9I4I
Table top fasteners: https://amzn.to/2CJ9Zog
Pre-stain conditioner: https://amzn.to/2CM3txp
Arm-R-Seal Urethane: https://amzn.to/2yAjIe0
36″ Clamps: https://amzn.to/2qcIX15
Rubber mallet: https://amzn.to/2EQVsJZ
Miter saw: https://amzn.to/2CJIVoY
Orbital sander: https://amzn.to/2ENKfKk
Wood glue: https://amzn.to/2SmiElY
Other products: https://www.amazon.com/shop/influencer-4e5e1fdd
Decorate your home with farmhouse and rustic decor to match this great furniture build: https://go.magik.ly/ml/czza/
https://www.731woodworks.com/731-blog/
I’m using TubeBuddy to get great YouTube analytics and tools to help grow my channel. Check them out here (affiliate link)! https://www.tubebuddy.com/731woodworks
#farmhouse #farmhousefurniture #farmhouseconsoletable
Do you let the 2x4s dry for a while before you start building something with them?
Can’t the new generation build anything without pocket joints ?
PJ’s have there place but even fair built furniture isn’t one of them.
Said the new generation machine operator. They’re not WW’s just tool junkies.
When placing the shelf in I might have cut a couple 3/4×3/4 cleats and screwed them to the frame. This way you could set the shelf on top of them and not had to drill pocket holes and cut the shelf so dead balls precise.
I’ll bet if you made a sled for your table saw that cutting half laps would take less time or close to the same amount of time but have a cleaner joint.
It would be good to stress to people not to make things that go inside a home or near food or children not to use Pressure Treated Lumber with the chemicals that leech out from it.
Do you have plans for this build?
Man! Put some wheels on that thing! 👍🏽
Awesome work 👍🏽
I am making it, just bigger, and thinner
Dude, what a great table. Will have to try to make that one for the wife!
Another good result 💯🎯
Wath size is the roundbit?
Why use the clips to secure the top? Couldn’t you drive a few 2 1/4 screws up from the bottom?
Absolutely love your work. My husband is making the coffee bar as his first project. Unfortunately, can’t find Sherwin Williams Biscuit White at my local paint store, nor on the SW website. Is there a similar color you would recommend for the table? Thank you!!
How did you cut the table top slot? Did I just miss thet?
I dont see the plan for this on your site. help?
Love the projects! You have really inspired me to just make something and start learning. Do mind sharing how much you sold that piece for?
After watching your video I would love to try this. It will be great if you can provide the material link (wood or plywood) used for this project for a beginner.
Is their a material list?
Are these plans available to purchase in your store?
Im looking for something similar but with doors to cover the shelves
How do I get the plans for this one specifically? I love it and want one like it in my house
Great work I love the video and everything you explained. I’m looking to build my own coffee bar and this video will be my go to for information! Thank you sir and keep up the good work! You do phenomenal work!
This is awesome! Have you eve4 added casters to the console table? I think that would make the table even more versatile.
What is the Shelf depth?
Checkout island country benches on marketplace. I build the same things.
Nice!! 🤙🏼
Best video on farmhouse style table on the internet! I’ll be shamelessly copying each step. Many thanks for inspiring
one recommendation, as you are cutting the boards for the top where you are going to use the z clips, I wished I had ran it through the table saw, to create the groove the z clips fit into. I found router was to tall after the fact and I don’t have a biscuit joiner.
I like to use my nail gun to pin joints together when using Kreg screws, or if I am countersinking screws. It helps prevent the screws from "walking" on me- even when clamped. Makes an extra strong joint in my opinion. Love this project, I’ve sold a few already, and built one for my wife for our house.
Would it be a better bond if I used pocket holes and bid kits for a table top
Checkout my other Farmhouse Furniture Builds here: https://www.youtube.com/watch?v=FB_sUSqFxM0&list=PLWVlC66wUw8ayvcHMjUGBB_yk0rGTvHQw
Brad nails ??
Love the console great job
I’m thinking of trying this for vinyl storage and putting the record player on the top shelf
Oh man, thanks for showing how to do x’s! Half planing is hard
You’ve certainly come a long way. Congratulations on all your hard work.
At 9:45 you show "how you do your exes" ..I definitely need to take advise from this video instead of keep chasing my exes! 😄
Seriously though, I appreciate you taking the time for posting this. A newbie like me can save himself a lot of trouble and frustration by following this video.
About how much is the material cost for one of these..
Thank you for your videos. Very helpful. Vineyards farmhouse tables. Austin Tx.
Thanks a lot for the vid brother, great detail! Really appreciate your YouTube channel, you’ve been a big inspiration for my furniture making business.
Do you have plans for this one on the site, I can’t find them?
Wife loved the coffee table and end table and wants me to build it for her wish me luck. Plus I figure I can take pictures of them staged in the house for the start of my portfolio what do you think
Im from Belgium and this maybe a stupid question, but do you use construction grade lumber for this coffee table? I am just starting to get into woodworking and really enjoy watching your videos🤘 learning a lot!! And btw, your arkansas accent is pretty awesome!!
This is not a critique, it is maybe a preference because I have some weird quirks I love how it turned out but I would have lowered the middle shelf so it is centered on the X. However very beautiful pieces and I picked up a tip with the urethane sealer so thank you.
I really like this table. Thinking of making one for our kitchen to hold a small toaster oven. The question I have is why do you use the level on your table saw between the fence and work piece?
Yes, I do enjoy learning your prices and pricing methods.
very nice
Thus will work perfect for my arcade game I asked you about!
i like the thorough explanation, thank you!
What was your table top cuts on the 2×8’s?
Well I’m gonna give it a try. Lord be with me.