Making My Own DIY F1 Mini Tyre!
Making My Own DIY F1 Mini Tyre!
Pirelli’s Wind Tunnel Tyres look awesome but they cost £700 each…
So I decided to make my own using go kart tyres, 3D printing and spray paint, all to fit within a £150 budget!
Download Pirelli Stencil and 3D rim: http://bit.ly/F1MiniTyre
▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁
Follow Me:
🐦Twitter: http://twitter.com/mattamys
📼Subscribe: http://bit.ly/SubscribeMattAmys
📷Instagram: http://instagram.com/mattamys
▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁
My Gear:
🟩Fanatec CSL Elite Steering Wheel P1: https://bit.ly/FanatecWheel
🟩Fanatec CSL Elite Wheel Base: https://bit.ly/FanatecWheelBase
🟩Fanatec CSL Elite Pedals: https://bit.ly/FanatecPedals
🟩F33L SR2 Sim Racing Gloves: https://bit.ly/SimRacingGloves
▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁
#F1
Thanks mate
Woah!!! Love it!!! Totally want one!!! 😍
it’ll probably be far more expensive but see if you can get one printed or cast in metal
7:08 that’s why should always remove the masking tape right after you are finished spraying, when its still wet. that way it doesn’t dry to the tape and leave uneven edges when removed.
Where did you get the 3d model from?
FINNALY
Do u think u can do the wet tyres
For the painting, use a white spray paint to create a base, that will make the red far brighter. Other than that, this is freaking amazing!
could you use that mini tire as a real tire on a go cart?
What’s the name of the song in the end???
Bloody brilliant!
Maleta
BROOO AT K1 SPEED THEY WERE GIVING AWAY GOKART TIRES LES GOOOOOO
Why not 3D print the entire thing?
I also made one with a tyre 7.1 inches wide. I also found the original 3D model you modified and printed the wheel nut separately.
My guy just got pole position
Do you sell this??
i cant find the original mini pirelli tyre
Next time use a white primer under the lettering. Will make the red pop more.
Who has a link to the tire
£92 for that print!? Not far off just buying your own entry-level printer at £200
6:18 what is that song?
What size was your go kart tyre?
This looks so cool. I made one myself using this tutorial. Turned out super great 😁 Thanks
you might be able to find someone locally to print that for you far cheaper than what you paid
6:15 oyy come 2gether
Can you make me one ha
wow only wow
That banding isn’t from the 3D printing process, it’s because there wasn’t enough detail in the 3D model
Maybe not perfect but it´s a very clean result anyway. Great job!
Great job!
This guy honestly deserves a pole position award
Funny thing is… with those 90£ you can just buy a whole 3d printer 😂
THANK YOU SO MUCH! You are a real one!
A really really cool design, mabey you could’ve sanded the wand of the tyre to remove the little things there, but its very nice anyway!
You should put white under the red and get a better looking red color.
YASS. I love it!
Pls just pay £700
I wanted one of these too until I saw it’s $1000 US dollars 😮
Making my own F1 Wheel
hey where did you get the model for the wheel
F1 be like: No, this isn’t how your supposed to play the game.
I use a mark forged and form labs printer the form labs one has lots of material resins and goes to about 100 microms so it is very smooth
if you wanted a more vivid red color, after the primer, use white spray paint then the red
Dunlop: Do I look like a joke to you?
Excellent. For just over £90 you could buy your own 3D printer. The person printing it used a multifaceted design instead of a round one, that could be a lot better.
Suggestion for a remake of this : make a 2 part rim so that it actually goes over the tire bead and is glued together in the center. It’s ok for somebody with no fabrication skills, but a few key improvements would make this much better :).
hola me gustó mucho el video
Incredible
You could get a better, rounder print with less faceting with different software. STLs when saved need to be told a tolerance. The default tolerances are crap for 3D printing, I lost a batch of resin prints to that.